Log-in/Create account
India
AT11EN-1 - Multi-Function Analog Timers
* Image may differ
AT11EN-1
- Operation method : Time setting
- Output Operation : SIGNAL ON DELAY, SIGNAL OFF DELAY, SIGNAL ON-OFF DELAY, FLICKER, INTERVAL
- Time operation : SIGNAL ON START
- Terminal : 11-pin plug
- Power supply : 12VDC @(=)
- Signal Input Method : No-voltage input(NPN)
- Control output : Time limit SPDT (1c) + Instantaneous SPDT (1c)
Data sheet Print
| Operation method | Time setting |
|---|---|
| Output Operation | SIGNAL ON DELAY, SIGNAL OFF DELAY, SIGNAL ON-OFF DELAY, FLICKER, INTERVAL |
| Time operation | SIGNAL ON START |
| Terminal | 11-pin plug |
| Power supply | 12VDC @(=) |
| Setting range | 0.05 to 0.5 sec, 0.1 to 1 sec, 0.5 to 5 sec, 1 to 10 sec, 0.05 to 0.5 min, 0.1 to 1 min, 0.5 to 5 min, 1 to 10 min, 0.05 to 0.5 hour, 0.1 to 1 hour, 0.5 to 5 hour, 1 to 10 hour, 5 to 50 hour, 10 to 100 hour |
| Signal Input Method | No-voltage input(NPN) |
| Control output | Time limit SPDT (1c) + Instantaneous SPDT (1c) |
| Min. signal Width | INHIBIT, START, RESET: Approx. 50ms |
| Accessories | Bracket |
| Environment_Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Environment_Ambient humidity | 35 to 85%RH, Storage: 35 to 85%RH (no freezing or condensation) |
| Unit weight (packaged weight) | ≈ 87.5 g (≈ 134.7 g) |
※Sockets (8-pin sockets: PG-08, PS-08(N)/11-pin sockets: PG-11, PS-11(N)) are sold separately.※Refer to time specifications for control time setting range by model.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
PR materials can be downloaded without login.
Technical dataView more
3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
PG Series
The PG series controller sockets are used with Autonics plug type control devices and provide high durability and electrical conductivity. The PG series is available in 8-pin and 11-pin sockets.
-
PS Series
The PS series controller sockets are used with Autonics plug type control devices and provide high durability and electrical conductivity. The PS series is available in 8-pin and 11-pin sockets for mounting on DIN rails or panels.