PRFDW08-2DN-V - Full-Metal Cylindrical Long-Distance Inductive Proximity Sensors

Data sheet Print

Data sheet

Installation	Flush
Sensing side diameter	Ø8mm
Sensing distance	2mm
Hysteresis(distance)	Max. 15% of sensing distance
Standard sensing target	12×12×1mm(iron)
Response frequency	150Hz
Indicator	Operation indicator (orange), stable indicator (green), Abnormal detect indicator (cross-flashing green, orange)
Unit weight (packaged weight)	≈ 25 g (≈ 50 g)
Power supply	10 - 30 VDC(ripple P-P: ≤ 10 %)
Current specification	Current consumption: Max. 20mA
Control output	Max. 100mA
Residual voltage	≤ 2.5 V
Protection circuit	Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Insulation resistance	≥ 50 MΩ (500 VDC megger)
Dielectric strength	1,000 VAC~ 50 / 60 Hz for 1 minute (between all terminals and case)
Vibration	1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours
Shock	500 m/s² (≈ 50 G) in each X, Y, Z direction for 10 times)
Environment_Ambient temperature	-25 to 70 ℃, storage: -25 to 70 ℃ (no freezing or condensation)
Environment_Ambient humidity	35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
Protection structure	IP66, IP67 (IEC standard)
Connection	Cable connector type
Connector type	M12 plug connector
Cable Standard/material	Oil resistant cable (dark gray)
Material	Case / Nut: stainless steel 303 (SUS303), washer: stainless steel 304 (SUS304), sensing side: stainless steel 303 (SUS303)

※Use accessories (nut, washer) made of SUS. Or, sensing distance cannot be guaranteed.
※The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
※Ambient temp.: UL approved surrounding air temperature 60 ℃