Log-in/Create account
USA
BD-A1 - Laser Displacement Sensors (Sensor Head and Amplifier Unit)
* Image may differ
BD-A1
- Power consumption : Max. 2800mW (30VDC@(=))
- Control input : No-voltage input
- Judgment output : NPN or PNP open collector output (Load current: Max. 100mA)
- Alarm output : NPN or PNP open collector output (Load current: Max. 100mA)
- Analog voltage output : -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V)
- Analog current output : ) 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA)
- Residual voltage : NPN: Max. 1.5V, PNP: Max. 2.5V
Data sheet Print
| Power supply | 10-30VDC@(=) ±10% (When connecting BD-C Series communication converter, 12-30VDC@(=)) |
|---|---|
| Power consumption | Max. 2800mW (30VDC@(=)) |
| Control input | No-voltage input |
| Judgment output | NPN or PNP open collector output (Load current: Max. 100mA) |
| Alarm output | NPN or PNP open collector output (Load current: Max. 100mA) |
| Analog voltage output | -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V) |
| Analog current output | ) 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA) |
| Residual voltage | NPN: Max. 1.5V, PNP: Max. 2.5V |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Response time | 0.33, 0.5, 1, 2, 5 ms (5-step adjustment) |
| Min. display unit | [BD-030 / 065 / 100] 1 ㎛ [BD-300 / 600] 10 ㎛ |
| Display method | Dual display by 6-digit, 11-segment LED |
| Display range | [BD-030 / 065 / 100] ± 99.999 to ± 99 mm (4-step paramete set) [BD-300 / 600] ± 999.99 to ± 999 mm (3-step parameter set) |
| Display cycle | Approx. 100ms |
| Insulation resistance | Over 20MΩ (at 500VDC megger) |
| Noise immunity | Square shaped noise by noise simulator (pulse width: 1 ㎲) ± 500 V |
| Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration | 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours |
| Shock | 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times |
| Environment_Ambient temperature | -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) |
| Environment_Ambient humidity | Under 85%RH, storage: under 85%RH |
| Protection structure | IP40 (IEC Standards) |
| Material | Case: Polycarbonate, Cover: Polycarbonate, Cable: Polyvinyl chloride |
| Connection method | Connector type |
| Supported sensor head | Sensor head (BD-□) |
| Supported comunication converter | Communication converter (BD-C) |
| Weight | 126 g (≈ 228 g) |
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
PR materials can be downloaded without login.
Technical dataView more
3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
