ENC-1-1-T-24 - Wheel Type Incremental Rotary Encoders
ENC-1-1-T-24
- Max. response frequency : 180kHz
- Max. allowable revolution : 5000rpm
- Output phase : A, B
- Wheel diameter : 250mm
- Gear ratio : 1:1
- Number of pulses : 250
- Control output : Totem pole
- Power supply : 12-24VDC @(=) ±5%(ripple P-P: max. 5%)
- Connection type : Axial cable type
- Protection structure : IP50
Data sheet Print
Max. response frequency | 180kHz |
---|---|
Max. allowable revolution | 5000rpm |
Output phase | A, B |
Wheel diameter | 250mm |
Gear ratio | 1:1 |
Number of pulses | 250 |
Min. measurement unit | 1mm |
Control output | Totem pole |
Power supply | 12-24VDC @(=) ±5%(ripple P-P: max. 5%) |
Connection type | Axial cable type |
Protection structure | IP50 |
Environment_Ambient temperature | -10 to 70℃, storage: -25 to 85℃ |
Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
Weight | Approx. 494g |
※Make sure that max. response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.[Max. response revolution (rpm) = Max. response frequency/Resolution × 60sec]※The weight includes packaging. The weight in parenthesis is for unit only.※Environment resistance is rated at no freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
BEST
CT Series
The CT series digital counter/timers are integrated units with functions of counters and timers. The units feature various input/output operation modes and load contact capacity up to 5A for flexible application in diverse industries. The RS485 models allow remote parameter configuration and monitoring via PCs. The CT series is available in 4-digit and 6-digit models in 3 standard DIN sizes (48 × 48, 72 × 72, 72 x 36 mm).
-
SPB Series
The SPB series switching mode power supplies offer high power conversion efficiency and stable power supply with low noise and ripple and minimal heat generation. The switching mode power supplies can be easily clipped onto DIN rails or mounted using screws. The slim and compact design also allows space-saving installation. The series also features various safety and user-friendly features including terminal protection covers (SPB-060/120/180/240) and rising clamp type terminals (SPB-015/030). Various output power models are available for application in diverse environments.