PRFDACM12-3DP - Full-Metal Cylindrical Long-Distance Inductive Proximity Sensors

Data sheet Print

Data sheet

Installation	Flush
Sensing side diameter	Ø12mm
Sensing distance	3mm
Hysteresis(distance)	Max. 15% of sensing distance
Standard sensing target	12×12×1mm(iron)
Response frequency	80Hz
Indicator	Operation indicator (orange), stable indicator (green), Abnormal detect indicator (cross-flashing green, orange)
Unit weight (packaged weight)	≈ 15 g (≈ 40 g)
Power supply	10 - 30 VDC(ripple P-P: ≤ 10 %)
Current specification	Current consumption: Max. 20mA
Control output	Max. 100mA
Residual voltage	≤ 2.5 V
Protection circuit	Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Insulation resistance	≥ 50 MΩ (500 VDC megger)
Dielectric strength	1,000 VAC~ 50 / 60 Hz for 1 minute (between all terminals and case)
Vibration	1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours
Shock	1,000 m/s² (≈ 100 G) in each X, Y, Z direction for 10 times
Environment_Ambient temperature	-25 to 70 ℃, storage: -25 to 70 ℃ (no freezing or condensation)
Environment_Ambient humidity	35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
Protection structure	IP66, IP67 (IEC standard), IP67G (JEM standard), IP68
Connection	Connector models
Connector type	M12 plug connector
Material	Case / Nut: stainless steel 303 (SUS303, PTFE coated), washer: stainless steel 304 (SUS304), sensing side: stainless steel 303 (SUS303, PTFE coated)

※Use accessories (nut, washer) made of SUS. Or, sensing distance cannot be guaranteed.
※The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
※Ambient temp.: UL approved surrounding air temperature 60 ℃