Log-in/Create account
USA
PSAN-L01CA-R1/8 - Digital Display Pressure Sensors
* Image may differPSAN-L01CA-R1/8
- Applicable fluid : (Fluid type) Air, Non-corrosive gas and fluid that will not corrode Stainless steel 316L
- Pressure port direction : Bottom fitting
- Pressure port : R1/8
- Connection type : Connector type(connector type cable: 2m)
- Pressure type : Standard pressure
- Power supply : 12-24VDC
±10%(ripple P-P: max. 10%) - Current consumption : Voltage output type: Max. 50mA
Current output type: Max. 75mA - Protection structure : IP40
Data sheet Print
| Applicable fluid | (Fluid type) Air, Non-corrosive gas and fluid that will not corrode Stainless steel 316L |
|---|---|
| Pressure port direction | Bottom fitting |
| Pressure port | R1/8 |
| Connection type | Connector type(connector type cable: 2m) |
| Pressure type | Standard pressure |
| Rated pressure range | 0.0 to 100.0kPa |
| Display pressure unit | MPa, kPa, kgf/cm², bar, psi |
| Control output_NPN open collector | NPN open collector |
| Option input/output | Current output(DC4-20mA) |
| Power supply | 12-24VDC ±10%(ripple P-P: max. 10%) |
| Current consumption | Voltage output type: Max. 50mA Current output type: Max. 75mA |
| Protection structure | IP40 |
| Control output_Hysteresis | Min. display interval |
| Control output_Repeat error | ±0.2% F.S. ±Min. display interval |
| Control output_Response time | Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms |
| Environment_Ambient temperature | -10 to 50℃, storage: -20 to 60℃ |
| Environment_Ambient humidity | 30 to 80% RH, storage: 30 to 80% RH |
| Material | Front case: Polycarbonate, Rear case: Polyamide 6, Pressure port: SUS304/SUS316L |
| Weight | Approx. 173g(approx. 88g) |
※In hysteresis output mode, detection difference is variable.
※It is allowed to select one analog output type only.
※The weight includes packaging. The weight in parenthesis is for unit only.
※F.S: Rated pressure.
※There may be ±1-digit error in hysteresis by pressure unit calculation error.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical data
- No search results
Used together with
AFE Series
The AFE series sensor connector terminal blocks can be used to connect Autonics CNE series sensor connectors to save installation time and work. Additional wire stripping or tools are not required. The compact size allows space saving installation. NPN/PNP selection is possible using the NPN/PNP selection switch.
CNE Series
The CNE series sensor connectors can significantly reduce installation work and maintenance time. With a wide range of connectors compatible with diverse cables and connection wiring, the sensor connectors help raise the productivity of industrial systems by making wiring work more convenient and efficient..