Recommended browsers

Please use Internet Explorer 10 or above for optimal viewing experience on the Autonics website.

When using Internet Explorer 10 or earlier, 3D CAD viewer and screen layout may not be displayed normally.
For ease of use the site, we recommend upgrading to a modern browser.

browser img

PRD12-8DN-V - Long-Distance Cylindrical Inductive Proximity Sensors

model * Image may differ

PRD12-8DN-V

  • Installation : Non-flush
  • Sensing side diameter : Ø12mm
  • Sensing distance : 8mm
  • Standard sensing target : 25×25×1mm(iron)
  • Response frequency : 400Hz
certmark certmark certmark certmark

Data sheet Print

Data sheet
Installation Non-flush
Sensing side diameter Ø12mm
Sensing distance 8mm
Hysteresis(distance) Max. 10% of sensing distance
Standard sensing target 25×25×1mm(iron)
Response frequency 400Hz
Unit weight (packaged weight) ≈ 62 g (≈ 74 g)
Indicator Operation indicator (red LED)
Power supply 12 - 24 VDC(ripple P-P: ≤ 10 %), operating voltage: 10 - 30 VDC
Current specification Current consumption: Max. 10mA
Control output ≤ 200 mA
Residual voltage Max. 1.5V
Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Insulation resistance ≥ 50 MΩ (500 VDC megger)
Dielectric strength 1,500 VAC~ 50/60Hz for 1 minute
Vibration 1.0 mm amplitude at frequency of 10 to 55 Hzin each X, Y, Z direction for 2 hours
Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Environment_Ambient temperature -25 to 70 ℃, storage: -30 to 80 ℃ (no freezing or condensation)
Environment_Ambient humidity 35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
Protection structure IP67(IEC standard)
Connection Cable type
Cable Standard/material Oil resistant cable (gray): polyvinyl chloride (oil resistant PVC)
Material Case/Nut: nickel plated brass (DIA. of sensing side Ø 8 mm connector type case: SUS303), washer: nickel plated iron, sensing side: PBT

※The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.

3D Viewer

* You can check out the 3D Viewer by the CAD button under the product image.

PR materials

PR materials can be downloaded without login.

    Technical data

    • No search results

    Used together with

    Recently viewed product(s)

    View more

    There are no recently viewed product(s)

    Interested product(s)

    View more

    Compare products

    View more

    Download history

    View more

    Product Inquiry