Log-in/Create account
Malaysia
A50K-M566-R10 - 5-Phase Stepper Motors (Rotary Actuator Type)
* Image may differ
A50K-M566-R10
- Basic Step Angle [FULL/HALF] : 0.072º/0.036º
- Max. allowable torque : 50kgf.cm
- Rotor Moment Of Inertia : 280g·cm²
- Winding Resistance : 1.1Ω
- Rated current : 1.4A/Phase
- Wire connection : Pentagon
- Protection structure : IP30
Data sheet Print
| Basic Step Angle [FULL/HALF] | 0.072º/0.036º |
|---|---|
| Max. allowable torque | 50kgf.cm |
| Rotor Moment Of Inertia | 280g·cm² |
| Winding Resistance | 1.1Ω |
| Rated current | 1.4A/Phase |
| Motor length | 93.5mm |
| Shaft type | Single shaft |
| Reduction ratio | 1:10 |
| Wire connection | Pentagon |
| Protection structure | IP30 |
| Allowable speed range | 0 to 180rpm |
| Backlash | ±20'(0.33˚) |
| ElectroMagnetic brake_Rated excitation voltage | 24VDC @(=)±10%(no-polarity) |
| ElectroMagnetic brake_Rated excitation current | 0.33A |
| ElectroMagnetic brake_Static friction torque | Min. 8kgf.cm |
| ElectroMagnetic brake_Rotation part inertia moment | 29×10@(^-7)kgf.cm² |
| ElectroMagnetic brake_B type brake | Power on: brake is released, power off: brake is operating |
| ElectroMagnetic brake_Operating time | Max. 20ms |
| ElectroMagnetic brake_Releasing time | Max. 25ms |
| Absolute positon error | ±20'(0.33˚) |
| Lost motion | ±20'(0.33˚) |
| Weight | Approx. 1.4kg(approx. 1.3kg) |
※Motor length is measured without shaft.※Max. holding torque/Max. allowable torque is maintenance torque in stopping the motor when supply the rated current and is standard method for comparing the Performance of motors.※The weight includes packaging. The weight in parenthesis is for unit only.※Environment resistance is rated at no freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
MD5 Series
The MD5 series 5-phase stepper motor drivers allow extremely precise motor control with low mechanical noise and low vibration operation. The isolated photocoupler input design minimizes influence from electrical noise. The motors also feature various built-in functions including auto current down and self-diagnosis. The microstepping drive models offer low-speed rotation and extreme precision with up to 250 division control.
-
PMC-1HS/2HS Series
The PMC-1HS/2HS series high-speed programmable motion controllers are stand-alone controllers capable of 1 or 2-axis control. The controllers also feature high-speed processing up to 4 Mpps and 4 operation modes (scan, continuous, index, program). 64 steps of programming is possible with a combination of 12 control commands. Operation programming, parameter configuration and editing can be done easily with the dedicated software.