Log-in/Create account
Malaysia
BF4R-E - Digital Display Fiber Optic Amplifiers
* Image may differ
BF4R-E
- Type : External synchronization input type
- Light source : Red LED(660nm)
- Response time : Frequency 1: Max. 0.5ms, Frequency 2: Max. 0.7ms
- Power supply : 12-24VDC @(=) ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by ON/OFF button)
- Control output : NPN open collector
Data sheet Print
| Type | External synchronization input type |
|---|---|
| Light source | Red LED(660nm) |
| Response time | Frequency 1: Max. 0.5ms, Frequency 2: Max. 0.7ms |
| Power supply | 12-24VDC @(=) ±10%(ripple P-P: max. 10%) |
| Current consumption | Max. 45mA |
| Operation mode | Light ON/Dark ON(set by ON/OFF button) |
| Control output | NPN open collector |
| Sensitivity adjustment | Manual |
| Environment_Ambient illumination | Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
| Environment_Ambient temperature | -10 to 50℃, storage: -20 to 70℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Mutual interference prevention | Built-in differential frequency mode(frequency 1(normal mode): max. 0.5ms, frequency 2: max. 0.7ms) |
| Self-diagnosis output | ON state under unstable sensing(when the target stays for 300ms in unstable level),ON state when control output is short-circuited•Load voltage: Max. 30VDC @(=)•Load current: Max. 50mA•Residual voltage - Max. 1V(load current: 50mA), Ma |
| Input of stop transmission function | Built-in |
| External synchronization function | Built-in(gate/trigger) |
| Material | Case: Heat-resistance acrylonitrile butadiene styrene, Cover: Polycarbonate |
| Cable specification | Ø4mm, 6-wire, 2m(AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm) |
| Accessories | Fixing bracket, Bolts, Nuts |
| Weight | Approx. 120g(approx. 65g) |
※The weight includes packaging. The weight in parenthesis is for unit only.※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
BESTFiber Optic Units
The FT/GT, FD/GD, FL/GL series fiber optic units are available in various sensing methods (through-beam, retroreflective, convergent reflective), 9 head types (thread, cylindrical, flat, L-shaped, plastic, perpendicular, stainless steel, U-shaped, area detection), 5 cable types (standard, flexible, break-resistant, heat-resistant, vacuum-resistant) for flexible installation in diverse environments.
-
SPA Series
The SPA series switching mode power supplies provide efficient power conversion and stable power supply with minimal noise and ripple. Various output voltage (5 VDC, 12 VDC, 24 VDC) and output power (30 W, 50 W, 75 W, 100 W, 400 W) models are available for diverse applications. The SPA series also features built-in overcurrent protection circuit, output short-circuit protection circuit, overheat protection circuit, and overvoltage protection circuits.