BS5-T2M - Groove-Depth 9mm Photomicro Sensors
* Image may differ
BS5-T2M
- Sensing type : Through-beam type
- Sensing distance : 5mm
- Power supply : 5-24VDC @(=) ±10%(ripple P-P : max. 10%)
- Control output : NPN open collector output
- Connection : Connector type
Data sheet Print
Sensing type | Through-beam type |
---|---|
Sensing distance | 5mm |
Sensing target | Opaque |
Min. sensing target | ≥Ø0.8mm×2mm |
Hysteresis(distance) | ≤0.05mm |
Response time | Light ON: Max. 20㎲, Dark ON: Max. 100㎲ |
Response frequency | 2kHz |
Light source | Infrared LED(940nm) |
Operation mode | Light ON/Dark ON(set by control wire) |
Indicator | Operation indicator (red LED) |
Weight_Body | Approx. 30g |
Power supply | 5-24VDC @(=) ±10%(ripple P-P : max. 10%) |
Load voltage | ≤30VDC@(=) |
Load current | Max. 100mA |
Residual voltage | NPN: ≤1.2VDC@(=), PNP: ≤ 1.2VDC@(=) |
Current consumption | Max. 30mA |
Control output | NPN open collector output |
Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
Insulation resistance | ≥20 MΩ (250 VDC@(=) megger) |
Noise immunity | The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC@(=) |
Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
Vibration | 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
Shock | 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times |
Environment_Ambient illumination | Fluorescent lamp: Max. 1,000lx(received illumination) |
Environment_Ambient temperature | -20 to 55℃, storage : -25 to 85℃ |
Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
Protection structure | IP50 (IEC standard) |
Connection | Connector type |
Material | Case: PBT, Sensing part: PC |
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
PR materials can be downloaded without login.
Technical dataView more
3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}