Recommended browsers

Please use Internet Explorer 10 or above for optimal viewing experience on the Autonics website.

When using Internet Explorer 10 or earlier, 3D CAD viewer and screen layout may not be displayed normally.
For ease of use the site, we recommend upgrading to a modern browser.

browser img

EWLS50-512-G-PN-24 - Wire-Type Linear Scale Absolute Encoders

model * Image may differ
CAD

EWLS50-512-G-PN-24

  • Shaft outer diameter : 50mm×50mm
  • Max. response frequency : 50kHz
  • Max. output pulse : 5,120division/512mm(resolution: 0.1mm)
  • Measurement range : 512mm
  • Output code : Gray Code
  • Control output : Parallel NPN open collector
  • Power supply : 12-24VDC @(=) ±5%(ripple P-P: max. 5%)
  • Connection type : Axial cable type
certmark certmark certmark certmark

Data sheet Print

Data sheet
Shaft outer diameter 50mm×50mm
Max. response frequency 50kHz
Max. output pulse 5,120division/512mm(resolution: 0.1mm)
Measurement range 512mm
Output code Gray Code
Control output Parallel NPN open collector
Power supply 12-24VDC @(=) ±5%(ripple P-P: max. 5%)
Connection type Axial cable type
Min. resolution 0.1mm
Response speed Max. 500mm/sec
Electrical specification_Input_Input signal Reset
Electrical specification_Input_Input level High: 5-24VDC @(=), Low: 0-1.2VDC @(=)
Electrical specification_Input_Input logic Low active, OPEN or HIGH for common use
Electrical specification_Input_Input time Min. 100ms
Environment_Ambient temperature -10 to 70℃, storage: -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH
Accessories Hexagon wrench screw(M4×8)
Weight Approx. 450g

※The unit will not process data when the power is OFF. It calibrates the data by comparing values of before and after power OFF status.
It should be used in the condition that wire movement is limit, because you cannot get the correct data when you utilize wiring function over ±20mm at the position when power is OFF.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.

3D Viewer

* You can check out the 3D Viewer by the CAD button under the product image.

PR materials

PR materials can be downloaded without login.
  • {{result.bbsCtgryNm}}
    {{result.nttSj}}
    Language selection
    Downloads Preview

Technical dataView more

3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
  • No search results

Recently viewed product(s)

View more

There are no recently viewed product(s)

Interested product(s)

View more

Compare products

View more

Download history

View more

Product Inquiry