PRD12-8DN-V - Long-Distance Cylindrical Inductive Proximity Sensors

PRD12-8DN-V
- Installation : Non-flush
- Sensing side diameter : Ø12mm
- Sensing distance : 8mm
- Standard sensing target : 25×25×1mm(iron)
- Response frequency : 400Hz
Data sheet Print
Installation | Non-flush |
---|---|
Sensing side diameter | Ø12mm |
Sensing distance | 8mm |
Hysteresis(distance) | Max. 10% of sensing distance |
Standard sensing target | 25×25×1mm(iron) |
Response frequency | 400Hz |
Unit weight (packaged weight) | ≈ 62 g (≈ 74 g) |
Indicator | Operation indicator (red LED) |
Power supply | 12 - 24 VDC |
Current specification | Current consumption: Max. 10mA |
Control output | ≤ 200 mA |
Residual voltage | Max. 1.5V |
Protection circuit | Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit |
Insulation resistance | ≥ 50 MΩ (500 VDC |
Dielectric strength | 1,500 VAC~ 50/60Hz for 1 minute |
Vibration | 1.0 mm amplitude at frequency of 10 to 55 Hzin each X, Y, Z direction for 2 hours |
Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
Environment_Ambient temperature | -25 to 70 ℃, storage: -30 to 80 ℃ (no freezing or condensation) |
Environment_Ambient humidity | 35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation) |
Protection structure | IP67(IEC standard) |
Connection | Cable type |
Cable Standard/material | Oil resistant cable (gray): polyvinyl chloride (oil resistant PVC) |
Material | Case/Nut: nickel plated brass (DIA. of sensing side Ø 8 mm connector type case: SUS303), washer: nickel plated iron, sensing side: PBT |
※The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical data
- No search results