PRFDAWT12-3DO-IV - Full-Metal Cylindrical Long-Distance Inductive Proximity Sensors

Data sheet Print

Data sheet

Installation	Flush
Sensing side diameter	Ø12mm
Sensing distance	3mm
Hysteresis(distance)	Max. 15% of sensing distance
Standard sensing target	12×12×1mm(iron)
Response frequency	80Hz
Indicator	Stability indicator (green), operation indicator (red)
Unit weight (packaged weight)	≈ 83 g (≈ 110 g)
Power supply	12 - 24 VDC(ripple P-P: ≤ 10 %), operating voltage: 10 - 30 VDC
Current specification	Leakage current: Max. 0.8mA
Control output	3 to 100 mA
Residual voltage	Max. 3.5V
Protection circuit	Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
Insulation resistance	≥ 50 MΩ (500 VDC megger)
Dielectric strength	Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute
Vibration	1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours
Shock	1,000 m/s² (≈ 100 G) in each X, Y, Z direction for 10 times
Environment_Ambient temperature	-25 to 70 ℃, storage: -25 to 70 ℃ (no freezing or condensation)
Environment_Ambient humidity	35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
Protection structure	IP67(IEC standard)
Connection	Cable connector type
Connector type	M12 Connector
Cable Standard/material	Oil resistant cable (dark gray): oil resistant polyvinyl chloride (PVC)
Material	Case / Nut: stainless steel 303 (SUS303, PTFE coated), washer: stainless steel 304 (SUS304), sensing side: stainless steel 303 (SUS303, PTFE coated)

※Use accessories (nut, washer) made of SUS. Or, sensing distance cannot be guaranteed.
※The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
※Ambient temp.: UL approved surrounding air temperature 40 ℃