Log-in/Create account
Global
BMS2M-MDT-P - Side Sensing Type Photoelectric Sensors
* Image may differ
BMS2M-MDT-P
- Sensing type : Retroreflective type
- Sensing distance : 2m(MS-2)
- Sensing target : Opaque material of min. Ø60mm
- Light source : Infrared LED(940nm)
- Response time : Max. 1ms
- Power supply : 12-24VDC @(=) ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON/Dark ON(set by control wire)
- Control output : PNP open collector
Data sheet Print
| Sensing type | Retroreflective type |
|---|---|
| Sensing distance | 2m(MS-2) |
| Sensing target | Opaque material of min. Ø60mm |
| Light source | Infrared LED(940nm) |
| Response time | Max. 1ms |
| Power supply | 12-24VDC @(=) ±10%(ripple P-P: max. 10%) |
| Current consumption | Max. 45mA |
| Sensitivity adjustment | Sensitivity adjuster |
| Operation mode | Light ON/Dark ON(set by control wire) |
| Control output | PNP open collector |
| Connection type | Cable type(Ø5, 2m) |
| Environment_Ambient illumination | Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
| Environment_Ambient temperature | -10 to 60℃, storage: -25 to 70℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Material | Case: Acrylonitrile butadiene styrene, Sensing part: Acryl, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum |
| Accessories_Individual | Reflector(MS-2), Adjuster driver |
| Accessories_Common | Fixing bracket, Bolts, Nuts |
| Weight | Approx. 110g |
※It is mounting distance between sensor and reflector MS-2 and it is the same when MS-5 is used. It is detectable under 0.1m.When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the “▣ Reflectivity By Reflective Tape Model”table before using the tapes.※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.※The weight includes packaging. The weight in parenthesis is for unit only.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
PR materials can be downloaded without login.
Technical dataView more
3D drawings for each detailed model can be checked and downloaded from the model page at the bottom.
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
