BTF1M-TDTL - Ultra-Compact, Thin Type Photoelectric Sensors
BTF1M-TDTL
- Sensing type : Through-beam type
- Sensing distance : 1m
- Sensing target : Opaque material of min. Ø2mm
- Light source : Red LED(650nm)
- Response time : Max. 1ms
- Power supply : 12-24VDC @(=) ±10%(ripple P-P: max. 10%)
- Operation mode : Light ON
- Control output : NPN open collector
Data sheet Print
Sensing type | Through-beam type |
---|---|
Sensing distance | 1m |
Sensing target | Opaque material of min. Ø2mm |
Light source | Red LED(650nm) |
Response time | Max. 1ms |
Power supply | 12-24VDC @(=) ±10%(ripple P-P: max. 10%) |
Current consumption | Emitter/Receiver: Max. 20mA |
Operation mode | Light ON |
Control output | NPN open collector |
Connection type | Cable type(Ø2.5, 2m) |
Environment_Ambient illumination | Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
Environment_Ambient temperature | -25 to 55℃, storage: -40 to 70℃ |
Protection structure | IP67 |
Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
Material | Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) |
Accessories | Fixing bracket, M2 bolt: 4 |
Weight | Approx. 70g (approx. 40g) |
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.※The weight includes packaging. The weight in parenthesis is for unit only.
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}