ASL-L01ST0-PN - Solid State Relay Terminal Block (Tipe Screwless Push-In)

Data sheet Cetak

Data sheet

Kisaran tegangan	24VDC ±10%
Kisaran tegangan beban dan arus	24-240VAC~ 50/60Hz 1A
Konsumsi arus	≤10mA
SSR yang diaplikasikan	SN-24A01C[Fujitsu]
Tipe terminal	Tanpa baut
Poros terminal	9.0mm(arranging over 2 units)
Indikator	Indikator operasi: LED Biru
Kabel yang digunakan_Solid wire	Ø0.6 ~ Ø1.25mm(hanya 60℃)
Kabel yang digunakan_kabel serabut	AWG22-16(0.3~1.25mm²)(hanya 60℃)
Ketahanan insulasi	≥1,000MΩ (pada 500VDC megger)
Dielectric strength_Di antara coil-contacts	2,500VAC~ 50/60Hz selama 1 menit
Dielectric strength_di antara coil-contact yang sama	1,000VAC~ 50/60Hz selama 1 menit
Lingkungan_kadar suhu	-15 hingga 55℃, ruang tertutup: -25 hingga 65℃
Lingkungan_kadar kelembaban	35 ~ 85%RH, ruang tertutup: 35 ~ 85%RH
Material	Terminal block: polyamide 66, conducting plate: brass, case&base: poly phenylene sulfide
Aksesoris	Jumper bar: 1
Tingkat proteksi	IP20 (standar IEC)
Berat	Kurang lebih 136g (kurang lebih 21g)

※This is relay load capacity when it is resistive load and temperature characteristic curve is satisfied.
※The current consumption including LED current by one relay.
※When using stranded wire, use End Sleeve (ferrule terminal) crimp terminals.
※The weight includes packaging. The weight in parenthesis is for unit only.
※The weight of 1-point unit is per 4 units with packaging and the weight of parenthesis is per 1.
※Environment resistance is rated at no freezing or condensation.