安全產品 | Autonics 台灣

所獲得的安全標準

Autonics透過開發各種產品(例如感測器，控制器)累積的專業知識，來研發了安全產品。 我們的安全產品透過獲得各種安全標準和法規來提供可靠性。

• Controllers
  SFC/SFC-R Series

  • IEC/EN 61508 (SIL 3)
  • IEC/EN 62061 (SIL CL 3)
  • IEC/EN 60947-5-1 (SRC-R)
  • IEC/EN 61000-6-2/4
    (SFC, SFC-A/N)
  • ISO 13849-1/2 (Cat. 4, PL e)
  • EN 50178

• Emergency Stop Button Switches
  SF2ERSeries

  • IEC/EN 60947-5-1/5
  • EN ISO 13850
  • GB/T 14048.5

• Door/(Flat type)Door Lock Switches
  SFD/SFDL/SFDL2 Series

  • IEC/EN 60947-5-1
  • EN ISO 14119
  • GB/T 14048.5

• Light Curtains
  SFL/SFLA Series

  • IEC/EN 61508 (SIL 3)
  • IEC/EN 61496-1/2
    (Type4, A.O.P.D., E.S.P.E.)
  • ISO 13849-1/2
    (Cat.4, PL e)

• Non-Contact Door Switches
  SFNSeries

  • IEC/EN 60947-5-3
  • IEC/EN 61000-6-2/4
  • EN ISO 14119

• Enabling Switches
  

  • IEC/EN 60947-5-1
  • IEC/EN 60947-5-8
  • GB/T 14048.5

• Key Selector Switches
  

  • IEC/EN 60947-5-1
  • GB/T 14048.5

推薦安全等級配置

配套使用正確的安全產品可以滿足PL e / Cat.4 同效等級，從而在各種應用中提供最高級別的安全性。

• 例1. PL e/Cat.4 同效(高級單元 – 安全光幕)

  Connection Examples 1

  ■ Advanced unit-Safety light curtain

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Advanced unit SFC-A Series Safety light curtain: SFL / SFLA Series Contactor of rated load (from Annex C of ISO 13849-1)	Auto	PLe/Cat.4 equivalent

  • For more information on wiring and detailed settings for safety light curtain (SFL/SFLA Series), refer to the “SFL/SFLA user manual .”
  • The control output of the safety light curtain (SFL(A) series) is based on the PNP output.
  • When you do not use the logic input (M61, M62), set the switch of the logic (AND) input (SW1, SW2) to OFF.
  • Set the switches for off-delay time on the front and back of the advanced unit to the same.

  

• 例2. PL e/Cat.4 同效(高級單元 – 安全門鎖開關，擴充繼電器單元)

  Connection Examples 2

  ■ Advanced unit-Safety door lock switch, Expansion relay unit

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Advanced unit SFC-A Series Safety door lock switch: SFDL Series Safety limit switch (from Annex C of ISO 13849-1) Safety emergency stop button switch: SF2ER Series Push button switch (from Annex C of ISO 13849-1) Contactor of rated load (from Annex C of ISO 13849-1)	Manual	PLe/Cat.4 equivalent
  Safety controller: Expansion relay unit SFC-ER Series Contactor of rated load (from Annex C of ISO 13849-1)	-

  • When you do not use the logic input (M61, M62), set the switch of the logic (AND) input (SW1, SW2) to OFF.
  • Set the switches for off-delay time on the front and back of the advanced unit to the same.
  • Be sure to supply suitable DC or AC to the MC5 and MC6.

  

• 例3. PL d/Cat.3 同效(非接觸式門開關單元 – 安全非接觸式門開關)

  Connection Examples 3

  ■ Non-contact door switch unit-Safety non-contact door switch

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Non-contact door switch unit SFC-N Series Safety emergency stop button switch: SF2ER Series Safety limit switch (from Annex C of ISO 13849-1) Push button switch (from Annex C of ISO 13849-1) Safety non-contact door switch: SFN Series Contactor of rated load (from Annex C of ISO 13849-1)	Auto	PLd/Cat.3 equivalent

  • For more information on detailed wiring for safety non-contact door switch (SFN Series), refer to the “Instruction manual for SFN .”
    When you do not use the logic input (M61, M62), set the switch of the logic (AND) input (SW1, SW2) to OFF.
    Set the switches for off-delay time on the front and back of the non-contact switch unit to the same.

  

• 例4. PL d/Cat.3 同效(基本單元 – 安全急停開關，非接觸式門開關單元 –安全非接觸式門開關)

  Connection Examples 4

  ■ Basic unit-Safety emergency stop switch, Non-contact door switch unit-Safety non-contact door switch

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Basic unit SFC Series Safety emergency stop button switch: SF2ER Series Push button switch (from Annex C of ISO 13849-1) Contactor of rated load (from Annex C of ISO 13849-1)	Manual	PLd/Cat.3 equivalent
  Safety controller: Non-contact door switch unit SFC-N Series Push button switch (from Annex C of ISO 13849-1) Safety light curtain: SFL / SFLA Series Safety non-contact door switch: SFN Series Contactor of rated load (from Annex C of ISO 13849-1)	Auto

  • For more information on detailed wiring for safety non-contact door switch (SFN Series), refer to the “Instruction manual for SFN .”
  • For more information on wiring and detailed settings for safety light curtain (SFL/SFLA Series), refer to “SFL/SFLA user manual. ”
  • The control output of the safety light curtain (SFL(A) series) is based on the PNP output.
  • When you use the logic input (M61, M62), set the switch of the logic (AND) input (SW1, SW2) to ON.
  • Set the switches for off-delay time on the front and back of the non-contact switch unit to the same.

  

• 例5. PL e/Cat.4 同效(繼電器單元 – 安全急停開關)

  Connection Examples 5

  ■ Relay unit-Safety emergency stop switch

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Relay unit SFC-R212 Safety emergency stop button switch: SF2ER Series Push button switch (from Annex C of ISO 13849-1) Contactor of rated load (from Annex C of ISO 13849-1)	Manual	PLe/Cat.4 equivalent

  • When you do not use the logic input (M61, M62), set the switch of the logic (AND) input (SW1, SW2) to OFF.
    Set the switches for off-delay time on the front and back of the relay unit to the same.

  

• 例6. PL e/Cat.4 同效(繼電器單元 – 安全光幕)

  Connection Examples 6

  ■ Relay unit-Safety light curtain

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Relay unit SFC-R412 Safety light curtain: SFL / SFLA Series Contactor of rated load (from Annex C of ISO 13849-1)	Auto	PLe/Cat.4 equivalent

  • For more information on wiring and detailed settings for safety light curtain (SFL/SFLA Series), refer to the “SFL/SFLA user manual. ”
    The control output of the safety light curtain (SFL(A) series) is based on the PNP output.

  

• 例7. PL e/Cat.4 同效(繼電器單元 – 安全門鎖開關)

  Connection Examples 7

  ■ Relay unit-Safety door lock switch

  Connection Examples

  Connections	Start	PL/Safety category
  Safety controller: Relay unit SFC-R212-R2□□ Safety door lock switch: SFDL Series Push button switch (from Annex C of ISO 13849-1) Contactor of rated load (from Annex C of ISO 13849-1)	Manual	PLe/Cat.4 equivalent

  • Set the switches for off-delay time on the front and back of the relay unit to the same.