Log-in/Create account
Malaysia
AiS-42MA-B - 2-Phase Closed Loop Stepper Motor System
* Image may differ
AiS-42MA-B
- Driver_Operation Method : Bipolar constant current Drive
- Driver_Applied Motor : Frame size 42mm, shaft type, built-in brake type 2-phase closed-loop stepper motor(Ai-M-42MA-B)
- Driver_Resolution : 500, 1000, 1600, 2000, 3200, 3600, 5000, 6400, 7200, 10000 PPR(SW2)
- Driver_Power supply : 24VDC @(=)
- Driver_Max. Run Current : 1.7A/Phase
- Motor_Protection structure : IP30
- Motor_Approval : @(CE)
Data sheet Print
| Driver_Operation Method | Bipolar constant current Drive |
|---|---|
| Driver_Applied Motor | Frame size 42mm, shaft type, built-in brake type 2-phase closed-loop stepper motor(Ai-M-42MA-B) |
| Driver_Resolution | 500, 1000, 1600, 2000, 3200, 3600, 5000, 6400, 7200, 10000 PPR(SW2) |
| Driver_Power supply | 24VDC @(=) |
| Driver_Max. Run Current | 1.7A/Phase |
| Driver_Max. Power consumption | 60W |
| Driver_Output | In-Position, Alarm Out, Brake, Encoder signal(A, @(A^), B, @(B^), Z, @(Z^)) |
| Driver_Protection structure | IP20 |
| Driver_Approval | @(CE) |
| Motor_Basic Step Angle [FULL/HALF] | 1.8º/0.9º |
| Motor_Max. Holding Torque | 4.08kgf.cm |
| Motor_Rotor Moment Of Inertia | 54g·cm² |
| Motor_Winding Resistance | 1.85Ω |
| Motor_Rated Current | 1.7A/Phase |
| Motor_Motor length | 108.3mm |
| Motor_Shaft Type | Single shaft |
| Motor_Operation Method | Bipolar constant current Drive |
| Motor_Resolution | 10,000PPR(2,500PPR×4-multiply) |
| Motor_Output phase | A, @(A^), B, @(B^), Z, @(Z^) |
| Motor_Max. response frequency | 300kHz |
| Motor_Protection structure | IP30 |
| Motor_Approval | @(CE) |
| Motor phase | 2-Phase |
| Driver_Environment_Ambient temperature | 0 to 50℃, storage: -20 to 70℃ |
| Driver_Environment_Ambient humidity | 35 to 85%RH, storage: 10 to 90%RH |
| Driver_Weight | Approx. 400g(approx. 290g) |
| Motor_Environment_Ambient temperature | 0 to 50℃, storage: -20 to 70℃ |
| Motor_Environment_Ambient humidity | 20 to 85%RH, storage: 15 to 90%RH |
| Motor_Weight | Approx. 0.83kg (approx. 0.73kg) |
※Built-in brake type 2-phase shaft type closed loop stepper motor (Ai-M-B Series) and built-in brake type 2-phase closed loop stepper motor driver (AiS-D-B Series) are available to order as a set (AiS-□-B).※Max. power consumption during operation. When changing the load rapidly, instantaneous peak current may increase. The capacity of power supply should be over 1.5 to 2 times of max. power consumption.※RUN current varies depending on the input RUN frequency and max. RUN current at the moment varies also.※The weight includes packaging. The weight in parenthesis is for unit only.※Environment resistance is rated at no freezing or condensation..
3D Viewer
* You can check out the 3D Viewer by the CAD button under the product image.
PR materials
Technical dataView more
- No search results
-
- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}- {{ result.parntsBbsCtgryNm }}
- {{ result.bbsCtgryNm }}
{{ result.nationAtchVoList[0].extension }} {{ result.nttSj }}
Used together with
-
PMC-1HS/2HS Series
The PMC-1HS/2HS series high-speed programmable motion controllers are stand-alone controllers capable of 1 or 2-axis control. The controllers also feature high-speed processing up to 4 Mpps and 4 operation modes (scan, continuous, index, program). 64 steps of programming is possible with a combination of 12 control commands. Operation programming, parameter configuration and editing can be done easily with the dedicated software.
-
atMotion
atMotion is a comprehensive motion control management software for managing Autonics motion devices. The user-friendly GUI provided in the software allows users to easily configure parameters and monitor operation status and data logs.